Aluminium gates Perth

Aluminium gates Perth

  Today’s job was the installation of a single 1 mtr wide pedestrian gate and a single automated 3 mtr gate. Both of these gates are made with a 50×50 aluminium welded frame with 100×50 for the bottom rail. The aluminum slatts are a mix of Western...
Colorbond fencing in Hocking

Colorbond fencing in Hocking

Colorbond fencing in Hocking This job we installed 1800mm high Riversand Colorbond fencing to a new property in Hocking. It has been core drilled 650mm into the limestone and filled with cream GP to match. Unlike other fencing companies we do not charge extra to core...
Colorbond fencing in Yangebup

Colorbond fencing in Yangebup

Colorbond fencing in Yangebup. This job was removal of Hardiefence which was damaged from winds and install Colorbond fencing. We had to use retaining plinths as there was a garden bed on one side which was around 400mm higher than the neighbours side. We used extra...
Colorbond gates in Wilson

Colorbond gates in Wilson

Todays Job was the installation of a set of double Colorbond gates and a single Colorbond gate in Wilson. The single gate is 1330 mm wide x 1850 mm high in Surfmist and the double gates are 3650 mm wide x 1850 mm high also in Surfmist with two small infill panels...
Colorbond fencing Perth

Colorbond fencing Perth

Recently we had to install some Colorbond fencing in Ashfield. The original fencing was Hardiefence which had come down during some strong winds. There was a considerable height difference between the two properties so we had to use retaining plinths underneath our...